SHOP / BMW / G8X M2/M3/M4 MONOLITH MIDPIPE
G8X M2/M3/M4 Monolith Midpipe
Tone Exhausts · BMW

G8X M2/M3/M4 Monolith Midpipe

$1,087.50
$1,450.00
SAVE 25%
HEAR THE TONE
MATERIAL — Stainless steel
PLATFORM — G80/G82
ShippingFree on all orders
ConstructionPrecision TIG welds
FitmentDirect slip on fitment

The Tone Monolith Midpipe is our flagship equal-length S58 midpipe for the BMW G87 M2, G80 M3 and G82 M4: an elongated X crossover for more flow than Z Tech, resonated to remove the low-end rasp, in 304 stainless or grade 5 titanium.

Most S58 midpipes force a trade-off: live with single-midpipe drone, or put up with the typical 2,000 RPM rasp that comes with an equal-length design's higher-pitched scream. The Monolith equal length midpipe is built to avoid both, and then go further, delivering even more flow than our Z Tech midpipe while keeping that same clean, aggressive S58 note. It's the best of both worlds: a high-pitched scream up top, with no rasp down low. Available in 304 stainless steel or grade 5 titanium, both a real weight savings over the factory midpipe, currently offered in 2.75 inch. Pair it with an axleback to complete a full catback system.

Fitment

  • BMW G80 M3 / M3 Competition / M3 Competition xDrive (2021+)
  • BMW G82 M4 / M4 Competition / M4 Competition xDrive (2021+)
  • BMW G87 M2 (2023+)
  • Works with factory or aftermarket downpipes and rear sections

Specifications

  • Equal-length design with single elongated X crossover
  • 2.75 in piping
  • 304 stainless steel or grade 5 titanium, TIG welded
  • Dual resonated
  • Direct bolt-on, fitment guaranteed

Frequently asked questions

Monolith vs Z Tech: what's the difference?
Both are equal length and resonated, so both avoid rasp and drone. Monolith's elongated X flows more and is available in titanium; Z Tech uses a 3D-printed Z crossover and is stainless only. If you're adding power, choose Monolith.

Does it rasp at 2,000 RPM?
No. The resonators after the crossover remove it.

Stainless or titanium?
Titanium is lighter, slightly brighter in tone and develops the blue heat tint. Stainless is the value choice. Full comparison here.

Can I pair it with the factory rear section?
Yes. For zero drone with valves open, add the Resonated Axleback.